- Home > Service
-
- When should I refill the reservoir bottles?
- Short answer, before they are empty. When you refill the bottles, do not fill them all the way up to the brim. Fill only to within 1 inch of the bottle tap.If you do run the reservoir bottle and the cartridge dry, it is possible to re-prime the chamber by removing the cartridge from the printer, plugging the exit holes, and repeating the filling instructions. However this will prove quite messy since you will be pumping some residue ink out of the cartridge in addition to the air. It would be better to order a replacement virgin empty cartridge from us.
- Service
Common question - Technical support
